Fieldbus converters

Nowadays, almost all modern communications systems implement an IP based design using TCP/IP protocols. Legacy industrial networks are more likely to run serial protocols such as Modbus RTU, Profibus and EtherCAT.

In order to integrate both types of networks, protocol conversion is necessary and gateways must be used to address the devices connected on the serial network.

In this section, you will find a range of fieldbus gateways that will enable you to seamlessly connect your serial network to an IP based network.

Product Range

Filter products

	Moxa MGate 5217 Series Moxa 2-port Modbus RTU/ASCII/TCP-to-BACnet/IP gateways POA	Supports Modbus RTU/ASCII/TCP master/client Supports BACnet/IP slave/server Supports 600 points and 1200 points models Supports virtual nodes designed to make each Modbus device as a separate BACnet/IP device Security features based on IEC 62443

	Advantech EKI-1242 series Advantech 2-port fieldbus gateways POA	Designed for protocol extensibility and adaption Mounts on DIN-rail and Wall mount Supports dual power input for power redundancy Designed for protocol extensibility and adaption

	Advantech EKI-1200 series Advantech 1/2/4/8/16 port Modbus gateways POA	Integration of Modbus TCP and Modbus RTU/ASCII networks Mounts on DIN-rail and Wall mount Software selectable RS-232/422/485 communication Supports up to 921.6 kbps, and any baud rate setting Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy

	Moxa MGate MB3x80 series Moxa 1,2 and 4 standard serial to Ethernet Modbus gateways POA	Allows the use of serial Modbus devices on an Ethernet Modbus network Multiple TCP masters & multiple requests supported Configurable prioritisation of master requests on slave networks Rugged metal construction & DIN-rail mount capabiltiy Serial Modbus tunneling over an IP network supported

	Moxa MGate MB3x70 series Moxa 1 and 2 port advanced serial to Ethernet Modbus gateways POA	Easy configuration Slave mode supports 16 TCP masters and up to 62 serial slaves Master mode supports 32 TCP slaves at the same time Dual redundant power inputs Built in Ethernet cascading for easy wiring

	Moxa MGate EIP 3000 series Moxa 1 and 2 port Ethernet/IP-to-DF1 gateways POA	Intelligent conversion between Ethernet/IP and DF1 serial networks PCCC objects for Rockwell Automation networks supported ProCOM provides a virtual serial port for multiple DF1 and EtherNet/IP device communication 8 simultaneous EtherNet/IP clients with up to 16 simultaneous requests per client Serial port redirector function provided

	Moxa MGate 4101-MB-PBS series Moxa 1 port Modbus RTU/ASCII to PROFIBUS slave gateways POA	Protocol conversion between Modbus RTU/ASCII and PROFIBUS Windows utilities with innovative QuickLink function fir automatic configuration Redundant dual DC power inputs and relay output supported Embedded data packet analyser Power diagnostic tool

	Moxa MGate 5101-PBM-MN series Moxa 1-port PROFIBUS-to-Modbus TCP gateways POA	Protocol conversion between PROFIBUS and Modbus TCP Automatic scan of PROFIBUS devices for easy configuration Redundant dual DC power inputs and relay output supported Embedded data packet analyser and diagnostic tool Web-based GUI for I/O data visualisation

	Moxa MGate 5102-PBM-PN series Moxa 1-port PROFIBUS-to-PROFINET gateways POA	Protocol conversion between PROFIBUS and PROFINET Automatic scan of PROFIBUS devices, and easy configuration microSD card for configuration backup Built-in Ethernet cascading for easy wiring Redundant dual DC power inputs and relay output supported

	Moxa MGate 5103 series Moxa Modbus RTU/ASCII/TCP/EtherNet/IP to PROFINET Gateway POA	Supports PROFINET IO devices Supports Modbus RTU/ASCII/TCP master/slave configurations Effortless configuration via web-based wizard Supports EtherNet/IP Adapter Complete diagnosis information for maintenance

	Moxa MGate 5114 Series Moxa Modbus RTU/ASCII/TCP/IEC101-to-IEC104 gateways POA	Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5- 101, and IEC 60870-5-104 Supports Modbus RTU/ASCII/TCP master/client and slave/server Effortless configuration via web-based GUI microSD card for configuration backup/duplication and event logs Built-in Ethernet cascading for easy wiring