Remote I/O units

Remote I/O units can be used to monitor and control analogue signals such as volts, mA, temperature and digital status signals such as alarms, whilst digital outputs can control devices such as pumps.

These units are available with Ethernet or Serial communications using industrial fieldbus protocols such as Modbus TCP, PROFINET, EtherNET/IP, EtherCAT, Modbus RTU/ASCII, PROFIBUS and CAN bus.

In addition to monitoring and control of signals over Ethernet, extra features are provided depending on which model is selected. These may include “peer-to-peer” communications and on-board “logic” control.

Our EtherCAT range is currently the fastest industrial Ethernet protocol that can synchronise with nanosecond accuracy. This is achieved by the Master being the only node allowed to actively send an EtherCAT frame.

Product Range

Filter products

	ICP DAS PET-7H16M series Ethernet High Speed DAQ 200 kS/s Per Channel Simultaneous Sampling From £458.33	8 Single-ended Analog Input Channels (16-bit Resolution) Maximum Sample rate: 200 kS/s per channel Supports real Sample and Hold 4 Digital Inputs 4 Digital Outputs

	ICP DAS ET-7000/PET-7000 series IPC DAS Ethernet measurement and control units From £160.42	Industrial Ethernet communications Flexible I/O, includes analog, digital, relay and counters Power and communication LED TCP/IP, UDP, Modbus/TCP Communication up to 100m without switch hub

	ICP DAS tET/tPET Series ICP DAS Compact Ethernet/Power over Ethernet I/O Units From £90.14	support Modbus TCP and UDP protocols Built-in powerful 32-bit MCU Flexible I/O, includes digital, relay and counter 32-bit high speed counter Suitable for frequency and PWM digital output measurements

	ICP DAS WISE-5231M-3GWA series ICP DAS Intelligent user-defined I/O Modules with SMS & Data Logger Function From £855.56	Built-in web server for IF-THEN-ELSE rule setting Built-in IF-THEN-ELSE rule enigne for logic operation Support I/O, Counter, Timer, Email, Recipe operations Data logger and data files send back function supported Modbus TCP/RTU Protocol for SCADA software seamless integration

	ICP DAS MQ-7200 Series ICP DAS MQTT Ethernet I/O units From £218.47	Industrial ethernet communication module Built-in web server Web HMI Support for MQTT 3.1 2-port Ethernet switch for daisy-chain topology

	Moxa ioLogik E1200 series Moxa remote Ethernet I/O server with 2-port switch POA	Built-in 2-port Ethernet switch for dasiy chaining Digital inputs or event counter Digital outputs or relays with pulse mode Analog input module for volts, mA or temperature Modbus/ TCP Ethernet interface

	Moxa ioLogik E1500 series Moxa Railway remote I/O with M12 connector POA	Compliant with EN 50121-3-2, EN 50121-4 and essential sections of EN 50155 Wide operating temperature: -40 to 85°C (-40 to 185°F) Channel-to-Channel isolation (DI Only) Robust and compact design for harsh environment Active communication with patented Active OPC Server

	Moxa ioLogik E2210/E2212/E2214 series Moxa Active Ethernet digital I/O server POA	Digital inputs or event counter (no memory on E2210) Digital outputs with pulse mode Modbus/ TCP Ethernet interface Unicode Active messaging with real-time clock Peer-to-Peer I/O without controller

	Moxa ioLogik E2240 / E2242 series Moxa Active Ethernet analog I/O server POA	Analog input channels for mV, V and mA Analog output channels or configurable I/O Modbus/ TCP Ethernet interface Unicode Active messaging with real-time clock Peer-to-Peer I/O without controller

	Moxa ioLogik E2260 / E2262 series Moxa Active Ethernet I/O for temperature sensors POA	RTD or thermocouple temperature measurement 4 digital outputs with pulse ability Modbus/ TCP Ethernet interface Unicode Active messaging with real-time clock SNMP to I/O mapping

	Moxa ioLogik 2512 series Moxa Smart remote I/O with 8 DIs, 8 DI/Os with 8 DIs, 8 DI/Os, GPRS, HSPA & Wireless LAN and Click&GO Plus Logic POA	New Click&GO Plus Logic for powerful forntend intelligence Transforms Modbus RTU into Modbus TCP or Active Tags optimised I/O expansion port for daisy chaining up to 8 ioLogik E1200 units Built-in datalogger with FTP server and micro SD (up to 32GB) supported Alarm Managmnet methods: Email, SNMP traps, TCP, UDP

	Moxa ioLogik 2542 series Moxa ioLogik 2542 with 4 AIs, 12 DI/Os, GPRS, HSPA & Wireless LAN, and Click&Go Plus POA	New Click&Go Plus Logic for powerful frontend intelligence Transforms Modbus RTU into Modbus TCP or Active Tags optimised I/O expansion port for daisy chaining up to 8 ioLogik E1200 units Built-in datalogger with FTP server and micro SD (up to 32GB) supported alarm Management methods: Email, SNMP traps, TCP, UDP

	Moxa ioMirror E3210 series Moxa Ethernet Peer-to-Peer I/O server POA	Remote digital input mapped to local digital output over Ethernet High speed peer-to-peer I/O without controller Copy sensor inputs to up to sixteen locations Local alarm and remote alarm message Modbus/ TCP Ethernet interface

	ICP DAS ECAT-2000 Series ICP DAS EtherCAT 2000 Series I/O Units From £116.11	On the fly processing: EtherCAT 2 x RJ-45 bus interface Distance between stations up to 100m Daisy chain connection support EtherCAT conformance verified

	ICP DAS M-7000 Series ICP DAS Remote analog and digital I/O units, RS485 From £71.81	RS485 Remote I/O units Flexible I/O, includes analog, digital, relay and counters Software supports direct ASCII communication and 32-bit programming DLL Communication up to 1.2km (without repeaters) Screw terminal signal connectors

	ICP DAS tM-Series Modules ICP DAS DCON, Modbus RTU, Modbus ASCII protocol Remote I/O From £65.69	Cost-effective remote I/O modules Supports Modbus RTU, Modbus ASCII and DCON protocols Isolated Digital Input and Output RS-485 bus supports baud rate up to 115200 bps Dual-watchdog with power-on and safe value

	ICP DAS PROFI-5000 Series ICP DAS PROFIBUS Remote I/O Units From £210.83	Baud rate up to 12Mbit/s Maximum 244 bytes input and 244 bytes output per slave Slave configuration and parameters are set from the master side by GSD file Allow Multi-master system Fast Cyclic data communication between master and slave

	Moxa ioLogik R1200 series Moxa Dual RS-485 remote I/O Units with built-in repeater POA	Dual RS-485 remote I/O with built-in repeater Supports the installation of multi-drop communication parameters Install communication parameters and upgrade firmware via USB Upgrade firmware through an RS-485 connection Wide operating temperature (-40 to 85°C) models available